This is the Futaba 8FG Super 2.4GHz 14-Channel Radio System with the R6208SB Receiver and No Servos. This is the airplane version which will default to airplane settings when powered up and has a ratcheted throttle stick. This version is [1]Mode 2[IMAGE]-Left Hand Throttle and Right Hand Elevator, USA Standard. FEATURES: Futaba"s FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies Fourteen total transmitter channels, 12 proportional and 2 switched 20-model memory expandable to unlimited model setups and downloads of online software updates with a 32MG - 2GB SD memory card (memory card not included, must be purchased separately) R6208SB receiver accepts a wide range of batteries, from 4-cell NiCd and NiMH packs to 2S LiFe and LiPo packs with no regulator required Receiver is capable of controlling up to eight channels using the outputs for a conventional system and up to eighteen channels including the two digital channels by using the output for the S.BUS system, receiver also has a high-speed mode that delivers ultra fast frame rates on channels 1-6 Ten character model and user name SensorTouch programming Backlit 128x64 LCD screen Factory defined mixes Stick calibration menus Trainer system (must purchase Trainer Cord, FUTM4405) One year limited warranty through Hobby Services beginning at date of purchase INCLUDES: T8FGAS Transmitter R6208SB Receiver, FUTL7668 HT6F1700B 1700mAh NiMH Transmitter Battery, FUTM1480 HBC-2B(4) Battery Charger, FUTM1805 Switch Harness Neck Strap Instruction Manual REQUIRES: Servos such as the Futaba S9252, S9255, S3151 and S3001 Receiver battery, size and mAh rating dependent on aircraft and number of servos used SPECS: Transmitter; Transmitting Frequency: 2.4GHz band Modulation: 2.4GHz 7ch or 2.4G multi-channel switchable Power Supply: 7.2V HT6F1700B NiMH Battery R6208SB Receiver; Power Requirement: 3.7 - 7.4V battery or regulated output from ESC* Size: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm) Weight: 0.49oz (13.8g) *When using ESCs make sure that the regulated output capacity meets your usage application jxs 03/31/11 ir/jxs 1. #