Tower Hobbies TOWER Trainer .60 MkII ARF 69.5"
This is the radio controlled, glow powered, Almost-Ready-to-Fly, Tower Hobbies Trainer .60 MkII Airplane. For Beginning Modelers/Fliers. FEATURES: Construction: Balsa, plywood Wings: All wood pre-covered, wing attaches to top of fuselage with rubber bands, heavy duty plywood wing joiner Covering: Factory applied high quality heat shrink film Color Scheme: Consists of Blue applied diagonally on the forward section of the wing and lower section of the fuselage. White covers the aft wing and upper fuselage sections with Red and Yellow stripes in between. Radio Compartment: Easily accesible, plywood reinforced Landing Gear: 5mm (.20") thick fixed wire with 4mm (.16") thick steerable nosegear, tricycle style Building Time: Ready to fly in several hours Warranty Period: Tower Hobbies guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, 2¾" (70mm) foam main and nose wheels metal engine mount, 14.2oz (420cc) fuel tank, 2½" (63mm) white spinner, wood servo trays and wing joiners, hardware package, and photo-illustrated instructions. REQUIRES: Engine: .61 cu in (7.5-10cc) 2-stroke Muffler: Sports-style, engine mounts in an upright position, muffler supplied with engine works fine Radio: Four Channel Servos: Four Standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder) (a high torque servo is suggested for the rudder, but not required) Servo Extension: One, 6" (152mm) Misc. Items: Fuel filter, propeller, building and field equipment SPECS: Wingspan: 69.5" (1765mm) Wing Area: 877 sq in (56.6sq dm) Weight: 7.5lb (3400kg) Wing Loading: 19.7 oz/sq ft (68g/sq dm) Length: 57.25" (1455mm) Airfoil: Flat Bottom High-Wing Center of Gravity: 3-3/4" (95 mm) Back from the wing"s leading edge Control Throws- High Rate Low Rate Elevator: Up & Down 5/8" (16mm) ½" (13mm) Rudder: Right to Left ¾" (19mm) 5/8" (16mm) Ailerons: Up & Down 5/8" (16mm) ½" (13mm) COMMENTS: If a replacement fuel tank is needed, order the Sullivan 14oz tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214). Some minor trimming and modifications may be required. jxs 4/08/03 ir/jxs updt jxs 10/08/04 updt jxs 3/04/05