This is a DUMAS 1/8 scale Replica of the the 1955 CHRIS CRAFT COBRA. FEATURES: Double planked hull with birch plywood and mahogany veneer Complete chrome diecast fitting set Pre-formed ABS plastic turtle deck, fin, and cockpit Complete running hardware kit with bronze prop INCLUDES: One complete instruction manual and plans/setup sheet One sheet of DUMAS/CHRIS CRAFT decals Vacuum formed ABS turtle deck/fin, and cockpit Clear lexan windshield Eight mahogany frame formers Fifty six mahogany deck planking strips Twenty eight birch sub-planking sections Nine spruce turtle deck stringers Three spruce motor mounting/keel blocks Five Basswood jackstaffs One Mahogany nose block Twelve styrene deck planking sheets and turtle deck seam Five assorted size brass hardware tubes Six NO.4 ½" pan head screws One 18" length of cockpit kit coaming tubing One plexiglass instrument panel sheet Cast metal navigation lights, ventilators, handles, step plates,rings and steering wheel. Complete Running Hardware Kit with Bronze Prop SPECS: Length: 27" Beam: 9¾" Weight: (approx.) Scale: 1:8 REQUIRES: Motor: One 550-size (15 to 27 turn) with a standard 1/8" shaft or Dumas #2004 6V scale or #2025 6V high speed motor Radio: 2 Channel Servo: One Heavy Duty and One Standard One 7.2V 6 Cell Battery, Charger, and Building Equipment One Heavy Duty Mechanical Speed Control w/Resistor Or Electronic Speed Control. WLG 10-30-98 ir/jl