This is the glow powered, 2.4GHz radio controlled, Traxxas Slayer Pro 4WD Short Course Race Truck. **The included TQ 2.4GHz radio system is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** FEATURES: Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D semi-monocoque with integrated roll hoop and carry handle Drive: Four wheel Drive Type: Shaft driven, shafts are .71" (18mm) diameter with half shafts and rubber shielded stub axle bearings Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve carburetor and high flow dual stage air filter with 60% more peak horsepower than the TRX 2.5 engine, EZ-Start electric starter and 7.2V battery Exhaust: Polished resonator dual chamber aluminum tuned pipe Fuel Tank: Low profile 5.1oz (150cc) with flip top cap Radio: Traxxas TQ 2.4GHz high output with digital ball bearing steering servo Clutch: Two shoe composite construction Transmission: Auto shifting wide ratio two speed, forward only Ball Bearings: Full set included, rubber sealed bearings used in all exposed locations Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled hard anodized bodies with TiN shafts Main Gear: 38 tooth, molded plastic Gearbox: Sealed front and rear Bumpers: Flexible molded front and rear tube style Suspension: Linkage based for long travel and precise tuning adjustments and control Differentials: Maintenance free, sealed with silicone X-rings and gaskets, limited slip action can be tuned using different viscosity oil Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented steel rotor and semi-metallic friction material Tires: BF Goodrich Multi terrain, soft compound rubber 1.6" (42mm) wide, 4.3" (109mm) diameter with foam inserts Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm) outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide Body: Traxxas ProGraphix pre-painted and trimmed with decals applied Bumpers: Front and rear, plastic construction Suspension: Variable progressive two rocker design, suspension travel not limited to length of shocks, ride height, suspension travel and progressive rate can be adjusted totally independent of each other, rubber sealed pivot balls can be adjusted with included tool without removing seals, steel pivot ball retaining rings Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle Steering: Ball bearing enhanced with twin high-torque servos driving a heavy-duty servo saver Warranty: 30 day warranty on electronic components Chassis and engine are warranted free from defects at the date of purchase before use. No warranties are expressed or implied that cover damage caused by normal use or wear, or cover or imply how long any chassis or engine part will last before requiring replacement due to wear. INCLUDES: Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ- Start, painted body, tires, wheels, inserts, TQ 2.4GHz radio w/ digital ball bearing steering servo, one standard servo, 15T clutch bell, 38T spur gear, tool set, illustrated manual, decals, two air filter elements, filter oil, engine setup DVD, long travel rocker and spring set, 7.2V battery, 110V wall charger, extra glow plug and fuel bottle REQUIRES: Fuel: Traxxas 10%-20% Top Fuel AA Radio Batteries: 8, 4 for transmitter 4 for receiver SPECS: Vehicle- Length: 23.54" (598mm) Width: 11.65" (296mm) Height: 7.87" (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9" (353mm) Front and Rear Track: 12.68" (322mm) outer edges of tires Center Ground Clearance: 2.5" (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body- Length: 21.5" (546mm) Width: 9.4" (238mm) behind front wheels, narrowest point 11.4 (290mm) at rear wheels, widest point Height: 5.5" (139mm) COMMENTS: The Slayer Pro 2.4GHz is available in the following body colors; Black and Red, TRAD81LR Red and Black, TRAD81RL Black and Silver, TRAD81LS Silver and Black, TRAD81SL All original bearings used in the Slayer Pro are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative. For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set 2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117 2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120 2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117 4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115 4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115 2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115 1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115 1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114 1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119 2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117 1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118 2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115 2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115 1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119 1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117 1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115 2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117 2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611 jxs 01/03/13 ir/jxs