21st Century Film is a Patented, Flexible High-Gloss Polyester that is Inexpensive, Easy, Clean and Quick to Use. This is a Multi-Temperature Film. It Will Not Burn Until Temperature Exceeds 400°F and Yet Still Adheres Using Temperatures Under 200°F. FEATURES: Super Strong with a Tensile Strength of 25,000 psi (pounds per square inch) Lightweight at Only .25 ounces per square foot Dry Adhesive is Activated When Heat Is Applied Shrinks To A Drum-Tight Finish As It Cools Molds Crease-Free Around Compound Curves and Into Corners High Gloss Finish, Waterproof, Fuelproof (Glow Fuel, Gasoline, Smoke) Stronger and Lighter Than Traditional Silk and Dope Coverings May Be Cleaned with Glass Cleaner or MonoKote Cleaner/Polish INCLUDES: One Roll (6" x 27") Neon Orange 21st Century Film Covering One Instruction Sheet REQUIRED: Sealing Iron (COVR2550), Iron Sock (TOPR2175), Heat Gun (TOPR2000). COMMENTS: For Covering Foam at Low-Temperature, Suggest (COVQ0711 COVQ0719). Black Baron Films Can Be Used On Top of 21st Century High Temperature Covering But Not Under. Note: Different Dye Lots Of 21st Century Paints, Films and Fabrics, May Vary Slightly In Color Between Production Runs Of These Products. 21st Century Paint: Not Available 21st Century Fabric: Not Available CAUTION: Fluorscent pigments may be affected by the sun"s ultraviolet light and by application over some modeling cements and CA accelerants. Discoloring may occur. If the possibility of blemishing is not acceptable, we recommend you make a different selection from the many non-neon colors of 21st Century Film. JAL 8/28/98 ir/jl