This is the brushless electric powered, 2.4GHz radio controlled, 1/8 scale Ready to Run SC8.2e Off-Road Race Truck from Associated with the Lucas Slick Mist Graphics. FEATURES: Chassis: Hard anodized 7075-T6 aluminum 0.13"(3.3mm) thick with functional roll cage and integral dirt shields Drive: Four wheel shaft Motor: Reedy 2000kV brushless Electronic Speed Control: 2S-4S LiPo compatible XPSC 1300-BL Radio: Associated XP-2SSi 2.4 GHz 2-channel radio with throttle/brake ATV, high torque S2008MG metal gear steering servo Shocks: Big Bore composite bodied oil filled with 4mm gold shafts Shock Towers: Aluminum 0.12" (3mm) thick Body: Lexan 0.06" (1.5mm) thick trimmed and painted with Lucas/ Slick Mist graphics Spur Gear: Molded composite 46 tooth Pinion Gear: 17 tooth Receiver Box: Enclosed, receiver box, servo, and battery tray remove from car in one piece for easy maintenance and cleaning Battery Tray: Molded tray supports two ROAR-approved 7.4V LiPo packs with room for foam pads, three hook and loop straps Wheels: New Method 3.1" (78mm) diameter, 1.7" (42mm) wide, 17mm hex Suspension: Adjustable pivot height, RC8.2 championship suspension geometry Bumper: Front and rear composite construction with rear mud flaps Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis, caster blocks adjust 14, 16, or 18 degrees with molded inserts Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Dual bell crank for more consistent steering and reduced bump-steer INCLUDES: Associated Ready to Run SC8.2e Off-Road Race Truck w/painted body brushless motor, ESC, 2.4GHz radio, steering servo and instruction manual REQUIRES: AA Batteries: Six for transmitter Battery: 4S 14.8V /or 3S 11.1V LiPo battery pack with Deans Ultra plug Battery Charger: LiPo compatible Building and track equipment SPECS: Vehicle- Length: 24.2" (616mm) Width: 12.24" (311mm) Weight: 8.91lbs (4040g) Wheelbase: 14.8" (375mm) Gear Ratio: 4.30:1 Body- Length: 24" (610mm) Width: 11.4" (290mm) Height: 6.9" (175mm) Thickness: 0.06" (1.5mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Stock Number 2 8x16mm Fr Diff 1 DTXC1585 2 8x16mm Rear Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 2 6x10mm Steering 1 DTXC1561 4 5x8mm Steering 2 DTXC1523 4 8x16mm Fr Hubs 2 DTXC1585 2 8x16mm Rear Hubs 1 DTXC1585 2 15x21mm Rear Hubs 1 DTXC1601 2 8x16mm Rear Gearbox 1 DTXC1585 jxs 08/06/12 ir/jxs