This is the 2.4GHz radio controlled, electric powered, ready to fly, Flyzone Switch Trainer. High wing mounting position offers stability for beginners and is easily switchable to a more aerobatic low wing position as beginners increase their flying skills. FEATURES: Construction: Aerocell foam Wing: Two-piece with carbon wing joiner, can be mounted in either a mid wing configuration or high-wing configuration with a different canopy, plug and lock attachment Aileron Control: Dual servo Landing Gear: Main, prebent natural finish aluminum, 0.08" (2mm) thick, 0.06" (1.5mm) tailwheel wire Wheels: Foam, main 2.2" (55mm) diameter, 0.61" (15.5mm) tailwheel Wheel Pants: Molded plastic Cowl: Molded plastic Radio: Tactic 2.4GHz TTX404 with digital aileron, elevator and rudder trim (analog throttle trim) Electronic Speed Control: SuperTigre 30 amp Spinner: Red plastic, 1.5" (39mm) Motor: SuperTigre 10 outrunner brushless (SUPG8050) Battery: SuperTigre 3S 11.1V LiPo Battery Charger: ElectriFly LiPo with AC and DC adapters, (GPMM3318) Propeller: 10x5 plastic Warranty: Flyzone guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. The Switch Trainer EP Success Guarantee guarantees that you will successfully learn to fly with this aircraft with its wing mounted in the trainer (high wing) configuration or Hobby Services will replace it with your choice of a Flyzone trainer of up to equal value. You must fly at an AMA chartered field with an AMA certified instructor within 60 days of purchase date and provide a statement about the crash and signature from the pilot and instructor. This Success Guarantee is not valid if the plane was flown in the mid wing configuration. Replacement trainer kit options are limited to non symmetrical wing trainer models available from Flyzone. Only one replacement kit per customer. Valid in the U.S. and Canada only. INCLUDES: Flyzone Switch Trainer with 2.4GHz radio system, ESC, Motor, Battery, Battery Charger, Propeller, Prop Adapter, Spinner, Instruction Manual, four AA Batteries, High Wing and Low Wing Canopies REQUIRES: Small slotted and phillips screwdrivers SPECS: Length: 42" (1065mm) Wingspan: 45" (1145mm) Wing Loading: 14oz sq/in (43g sq/dm) Weight: 2.5lbs (1130g) Center of Gravity (CG): Between 2-7/16" (62mm) and 3-1/2" (89mm) from the leading edge of each wing panel measured at the fuselage sides Control Throws: Set at factory. If the control throws are changed (not recommended) or to check the throws, use the following measurements; Elevator: Up & Down 11/16" (17mm) 18° Rudder: Right & Left 1-3/16" (30mm) 19° Ailerons: Up & Down 7/16" (11mm) 16° COMMENTS: If a replacement battery is needed, order FLZA6024 For plastic hardware repair parts use GPMA2942 jml 01.26.11 jxs 05/25/10 ir/jxs