This is the Futaba S3004 Light Weight, Ball Bearing Servo. This basic servo is used in cars, boats, or where standard servos are used. Note: This servo is not designed for use with glow-powered helicopters. This is a replacement for the following servos.(S15) This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Single ball bearing on output shaft Precise tight fit throughout the geartrain Being standard size and lightweight, it fits many applications. Three pole motor Nylon gears One year warranty INCLUDES: One S3004 standard servo with preinstalled round servo horn(FSH6W) Four brass eyelets Four Black one-piece rectangular rubber grommets (FUTM2348) Four servo mounting screws Three servo horns (1 lg. round, 1 lg."X" and 1 sm. "x") SPECS: Speed: 0.23 sec/60° @ 4.8V 0.19 sec/60° @ 6.0V Torque: 44 oz-in (3.2 kg-cm) at 4.8V 57 oz-in (4.1 kg-cm) at 6.0V Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm) Weight: 1.3 ounce (1-5/16oz) (37 grams) Connector: "J" type with approx. 5" wire COMMENTS: inch (millimeters) ## .60(15) flange to Side view: 1.42(36) __¦--------¦__ top of bottom to top ¦ ¦ shaft of case(not ¦ ¦ 1.0(25) flange to output shaft) ¦________¦ bottom of 1.59(40.4) servo Top view: | ¦O¦ ¦O¦ - case width 0.78(19.8) ¦ ¦ * ¦ ¦ - holes on-center | ¦O¦ ¦O¦ - 0.39(10) 1.93(49) center-to-center of holes sml11/29/00 ir/jl updt jxs 10/30/03 updt mcw 5/19/04 updt jxs 10/29/04