This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run ADX-10 Race Buggy with Painted Body from Aarma. FEATURES: Chassis: Twin vertical aluminum plate with double chassis rails and alloy front chassis plate, batteries fit under chassis-no need to remove body to change batteries Drive: Rear wheel with steel driveshafts and axles Motor: 15 turn brushed Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver, transmitter can be converted for left or right hand use, seven position adjustable steering wheel, digital trim, servo reverse, end-point adjustment and failsafe Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff Receiver Box: Splash and dust proof Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff Battery: 1500mAh 6-Cell NiMH stick pack with standard connector Battery Charger: AC wall type Pinion Gear: 48 pitch 22 tooth steel Spur Gear: 81 tooth 48 pitch composite plastic Body: Trimmed and painted "Ripper" polycarbonate three color body with race legal polycarbonate rear wing Transmission: Metal gear, brushless ready Slipper Clutch: Machined alloy gears, adjustable for different track conditions Suspension: Fully independent Differential: Metal gear, oil filled Shocks: Oil-filled Tires: dBoots Terrabyte multirib with dBoots foam inserts Wheels: Dish type black in color Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bellcrank type with composite servo saver Warranty: Two year limited warranty beginning at date of purchase INCLUDES: RTR ADX-10 Race Buggy with Painted Body and 2.4GHz Radio, ESC, Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals, Instruction Manual, Battery and Charger REQUIRES: AA Batteries: Four for transmitter Building and track equipment SPECS: Vehicle- Length: 15.7" (400mm) Width: 9.6" (245mm) Height: 6.1" (155mm) Wheelbase: 11.4" (290mm) Ride Height: 1.25" (32mm) Weight: 2.97lbs (1350g) without battery Body- Length: 12.5" (317mm) Width: 5.5" (140mm) Height: 2.9" (74mm) COMMENTS: Available in the following body colors; Blue, ARAD02BB Green, ARAD02GG Red, ARAD02RR If wanting to upgrade to a brushless motor, the Duratrax Element 3900kV Brushless Power System (DTXC3122) is a ideal choice. The stock 81 tooth 48 pitch spur gear can be used. A 48 pitch 25T pinion gear (RRPC1025) is recommended. For replacement or to upgrade to ball bearings use: Qty. Size Location Qty. Bearing Set 4 5x10mm Fr Hubs 2 DTXC1535 4 5x13mm Rear Hubs 2 ARAC3201 2 10x15mm Idler gear 1 DTXC1595 4 5x10mm Gearbox 2 DTXC1535 jxs 09/24/12 ir/jxs