This is the brushless electric powered, radio controlled, almost ready to run 1/10 scale Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck. The differences between this version and the 6804 are a new Low CG Chassis and GTR High Volume Shocks on the 6804R. Requires transmitter, receiver, batteries, charger and paint for the body. FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type Drive: Four wheels of chassis Electronic Speed Control: Traxxas VXL-3S waterproof, with high- current connector, training mode, reverse and low voltage detection for use with 2S and 3S LiPo packs Motor: Traxxas Velineon 3500 with ultra high temperature Neodymium magnets and high speed ball bearings Spur Gear: 45 tooth Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+ MPH operation with extra battery Body: Clear polycarbonate with overspray film and window masks Bumpers: Front and rear, composite construction Shocks: Hard anodized oil-filled aluminum body GTR with PFTE coated 13mm bores and titanium nitride shafts for smooth, consistent damping Suspension: C-hub design, front and rear sway bars Transmission: Ball bearing equipped Differentials: Sealed silicone filled planetary gear type, center diff installs trackside in minutes replacing the Torque Control slipper Ball Bearings: Rubber sealed Caster: Non-adjustable Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Tires: Licensed BF Goodrich soft compound Mud Terrain T/A 4.3" (109mm) diameter, 1.7" (43mm) wide Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm) diameter, standard size 12mm hex, aluminum wheel nuts Steering: Blue anodized aluminum steering blocks, spring loaded servo protection, high torque digital ball bearing servo INCLUDES: ARR Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck with steering servo, decals, aluminum C-hubs, steering blocks, rear hub carriers and axle nuts, extra swaybar set, Big Bore shocks, clear body, Velineon 3500 brushless motor and instruction manual REQUIRES: Radio: 2-channel transmitter with receiver AA Cells: Eight for transmitter Battery: Charger: Paint: Polycarbonate safe spray or brush-on SPECS: Vehicle- Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) distance between outer edges of wheels side-to-side Ground Clearance: 2.5" Body- Length: 21.25" (540mm) Width: 11.5" (292mm) Height: 5.5" (140mm) COMMENTS: The ball bearings in the Traxxas Slash 4x4 are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax; Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 jxs 12/28/12