This is the electric powered, 2.4GHz radio controlled, ready to run 1/16 scale Rally Racer from Traxxas. FEATURES: Chassis: Molded composite nylon monocoque design with integrated vented battery compartments with quick release battery doors Drive: Four wheel shaft drive with universal joint driveshafts Motor: Traxxas Velineon brushless, 380 size with high-speed ball bearings, sintered rotor, neodymium magnets and gold-plated 3.5mm connectors Electronic Speed Control: Traxxas VXL-3m, LiPo compatible with low- voltage protection Radio: Traxxas TQ 2.4GHz 2-ch pistol grip with Traxxas Link, 5-ch micro receiver, high-torque digital micro servo and waterproof O-ring sealed receiver box Shocks: GTR threaded plastic body, oil-filled, inboard mounted, rocker actuated Ball Bearings: Full set, rubber sealed Transmission: Ball bearing equipped with adjustable slipper clutch Differentials: Sealed, silicone filled, hardened steel planetary gears Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high current connector, dual NiMH battery capability (extra battery (TRAC2925) and series adapter (TRAP3063) not included and must be purchased separately). Vehicle is also compatible with one 2S or 3S LiPo pack (not included) LiPo mode on ESC must be selected. **NOTE the ESC and motor CANNOT handle dual LiPos, if using dual batteries, both must be NiMH.** Battery Charger: 110V wall charger with Traxxas high-current connector Body: ProGraphix, painted and trimmed Bumper: Front foam Steering: Bellcrank with servo saver Tires: Officially licensed hard compound replica BF Goodrich drift with foam inserts, 1" (26mm) wide, 2.6" (65.4mm) diameter Wheels: White split spoke rally, 1" (26mm) wide, 1.9" (48mm) diameter 12mm hex Suspension: Pivot ball type Revo-spec rocker actuated long travel inboard design INCLUDES: RTR Traxxas 1/16 scale Rally Racer with 2.4GHz radio, painted body, brushless motor, 6-cell battery, charger, extra pinion gear and instruction manual REQUIRES: AA Batteries: Four for transmitter SPECS: Vehicle- Length: 14" (356mm) Width: 7.3" (185mm) Height: 4.5" (114mm) Weight: 34oz (964g) Wheelbase: 8.25" (209mm) Ground Clearance: 0.59" (15mm) Front and Rear Track: 7.3" (185mm) distance between outer edges of wheels Body- Length: 14" (356mm) Width: 7.3" (185mm) Height: 3.9" (100mm) COMMENTS: The ball bearings in the Traxxas Rally VXL are rubber sealed. Following are the stock numbers for the replacement bearings from Traxxas and non-rubber sealed alternatives from Duratrax; Qty. Size Location Qty. Bearing Set 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523 2 4x7mm Rocker Arm Post 2 DTXC1507 4 8x12mm Differentials 2 TRAC7020 DTXC1581 4 4x8mm Differentials 2 TRAC7019 DTXC1511 6 4x8mm Transmission 3 TRAC7019 DTXC1511 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511 The Traxxas 2.4GHz E-Revo VXL is available in the following colors; Blue, TRAD26BB Red, TRAD26RR Green, TRAD26GG Silver/Black, TRAD26SL jxs 10/19/10