This is the DuraTrax Ice Battery Charger, Discharger and Cycler. *** Five-Year Warranty *** FEATURES: Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or Lithium Polymer (LiPo) cells Wide adjustable current ranges for Fast Charge (.1A-8A) and Discharge (.1A-10A) are ideal for electric cars, trucks and boats Four Charge modes: Linear, Reflex, Impulse, and 4-step* * The optional battery temperature monitor is required for 4-step Charge feature (DTXP4171) "Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo batteries Reverse Polarity Protection Peak Detection with adjustable sensitivity for NiCd & NiMH batteries 0-500mA adjustable TRICKLE Charge current for NiCd and NiMH .8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH 2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full cycles Stores info for up to 10 batteries in memory by custom names for easy recall and charger set-up LCD screen shows 8 lines of data and 21 characters per line 1-8V adjustable output, time adjustable from 1-120 minutes and 10A Constant Current (30A surge) for motor break-in Also breaks-in electric motors and operates commutator lathes INCLUDES: One DuraTrax IntelliPeak ICE charger w/ banana jacks on output lead, ** alligator clip charge leads, Tamiya style charge lead, input lead with pre-installed banana plugs, large alligator clips, and instruction manual REQUIRES: 12V DC power from a Power Supply or automotive battery or Hobbico 12V Power Supply (GPMP0901) or Rivergate 15A DC Bulldog Power Supply To achieve ICE"s absolute maximum output power capabilities the DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions). Charge Leads depending on type of battery; DTXC2220 Charge Lead Banana to Standard DTXC2221 Charge Lead Banana to DNS Male DTXC2222 Charge Lead Banana to Traxxas DTXC2223 Charge Lead Banana to Mini Plug HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY HCAP0105 JR Tx/Rx Charge Leads HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads GPMM3149 Charge Lead Banana/Deans Micro SPECS: Input Voltage: 11-15V DC Battery Types, # of cells: 1-10 Nickel Cadmium cell (1.2-12V) 1-10 Nickel Metal Hydride cells (1.2-12V) 1-4 Lithium Ion or Lithium Polymer cells (3.6-14.8V) Battery Capacity Range: 100-9900mAh Fast Charge Current: .1-8A Linear, Reflex, Impulse and 4-step Fast Charge Termination: Peak Detection for NiCd and NiMH "Constant Current/Constant Voltage" for Li-Ion/LiPo, optional thermal cutoff for all battery types Peak Sensitivity: 0-25mV adjustable TRICKLE Charge Current: 0-500mA (n/a for Li-Ion/LiPo) Discharge Current: .1-10A adjustable Discharge Cut-Off Voltage: .8-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-Ion/LiPo Temperature Cut-Off Range: 50-132°F Cycle Count: one to ten (n/a for Li-Ion/LiPo) Cycle Cooloff Delay: 1-30 minutes, adjustable Battery Memories: 10 Display Type: 8x21 LCD (168 characters max) Graphical Displays: Graphs Charge and Discharge Voltage curves Output Connectors: Banana jacks Motor Break-in: 1-8V selectable, 1-120 minutes, 10A constant Case Size: 5.5" x 1.8" x 5.9" (140x45x150mm) Weight: 21oz (605g) jxs 10/18/04 upd jrb 12/03/04 ir/jxs upd EEW 12/30/04 ** upd cmc 03/18/05 updt jxs 8/09/05 Updated JBM 1-16-06