This is the 2.4GHz Radio Controlled, Brushless Electric Powered, Ready to Fly Tidewater Seaplane from Flyzone. FEATURES: Construction: AeroCell foam Wing: One-piece with motor and pod, wing attaches to fuselage with 1/4-20x2 nylon wing bolt Aileron Control: Dual servo Motor: 28-30-1300 kV brushless outrunner Radio: Tactic 2.4GHz TTX404 4-channel transmitter with TR624 6-channel receiver Electronic Speed Control: 30A Servos: Four micro (2-aileron, 1-rudder, 1-elevator) Battery: ElectriFly 3S 11.1V 2200mAh 30C with Deans Ultra Plug Battery Charger: Great Planes AC/DC 3S balancing LiPo Smart Charger Propeller: 9x4.5 ElectriFly PowerFlow Slo-Flyer, plastic construction Spinner: 2" (51mm) gray plastic Landing Gear: Two tip floats on either side of wing Warranty: Flyzone guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: RTF Tidewater Seaplane with 4-ch 2.4Ghz Radio, Brushless Motor, 30A ESC, Prop, LiPo Battery, Charger, two Tip Floats, Instructions, and four AA Batteries SPECS: Wingspan: 41.5 in (1055mm) Length: 36 in (915mm) Weight: 32 oz (905g) Center of Gravity: Forward CG, 1-3/4" (44mm) Recommended CG, 1-7/8" (48mm) Aft CG, 2" (51mm) All measurements are from the leading edge of the wing at the fuselage side Control Throws: Low Rate High Rate Elevator: 1/4" (6mm) 12° 7/16" (11mm) 15° Rudder: 1/2" (13mm) 14° 7/8" (22mm) 24° Ailerons: 1/4" (6mm) 11° 1/2" (13mm) 23° jxs 01/07/13 ir/jxs