- Viking advanced clock controlled tone/message generator- Designed to provide accurately timed tones and/or messages over existing paging system- Provides a cost effective way of signalling school period changes factory shifts breaks lunch periods etc.- 4 programmable trigger inputs which are ideal for triggering emergency alert tones/messages to indicate fire evacuation severe weather lock down all clear or can be used in store castor applications for "customer service required" announcements etc.- Comes equipped with up to 6 minutes of CD quality WAV file audio storage for up to 14 different tone/messages- Factory loaded with mon school business and factory tones but can be programmed with your custom tones/messages or updated from the list of WAV files from the Viking website- Programmable with up to 14 schedules and up to 1000 events allowing for the programming of an entire year or multiple years of schedules in advance- Automatic daylight saving time and leap year correction- Programmable atomic clock synchronization- USB PC programming software included- Non-volatile memory with 4 hour clock back up- Factory loaded with school and factory tones- Remote phone programming for on/off and schedule change- Page trigger outputs (12VDC and DPDT relay)- Programmable auxiliary relay contacts (DPDT)- 24 hour digital clock displays hours and minutes- One mono line level pre-amp input and two audio outputs- Built-in 2 watt mono audio amplifier- Master volume control- Programmable volume control per tone/ message- Time base selection: atomic clock 50/60Hz or internal - Programmable message repeat count for trigger inputs- RS485 clock SYNC terminals for future remote clock control- Paging Amplifier Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers- Sound Pressure: 100 dB @ 1 meter (loud electronic warble from 25AE paging horn)- REN: 0.0 B- Maximum Speaker Output Wire Run: 91m (300 ft) 18 AWG- Maximum Load on Page Trigger Output: 1K ohm- WAV File Resol