The Enable-IT 260LP Ethernet Lightning Protector is a set of compact ruggedized weather resistant units that provide lightning and surge protection for Ethernet data applications. The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.For maximum protection this kit provides two 260LP units - one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT 260LP Ethernet Lightning Protector Kit is compatible with 10 Base-T, 100 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).Data SheetManual Superior performance and lowest cost over any competing technology. Longest warranty protection included exceeding any knockoff competitors. Broadband Ethernet Technology that delivers Lightning Surge Protection in a confined space. Ideal for protecting any Ethernet data lines Quick install RJ-45 Ethernet connection The 260LP kit is a complete solution including the following: (2) 260LP units (1) 260LP Ethernet Lightning Surge Protection Kit Installation Manual