SABRENT SBT-RDIT Silicon Image Ultra ATA 100/133 IDE RAID PCI Host Controller Card Plus Ultra ATA 100/133 cable This card is stand-alone Ultra 100/133 PCI to IDE/ATA host controller is the perfect single chip solution for designs based on chipsets without an integrated IDE host controller or designs which need to expand the number of IDE channels to accommodate the growing number of storage peripherals with IDE interface. This card is a PCI 2-channel Ultra ATA/133 IDE host controller based on SILICON IMAGE, with optional RAID 0, 1/0+1 function. Any system with a PCI bus interface can simply add the Ultra 100/133 IDE/ATA interface by adding a card with the PCI card and loading the driver into the system. Achieves High-Speed data Transfer Rates up to 133/100MB/sec Internal 32 bit PCI Card Supports Ultra ATA 133/100/66/33, EIDE/Fast ATA 2 IDE & ATAPI Devices Coexists with on board IDE ports and connects up to 4 IDE/ATAPI Devices Specifications: Silicon Image chipset 2 independent IDE/ATA channels Supports up to 4 IDE/ATA devices Supports ultra and multiword DAM timing modes CRC (Cyclical Redundancy Check) 128 bytes buffer Built in 80-pin cable detect circuitry Supports External BIOS Supports bus master DMA at 133 MB/sec PCI burst rate Supports maximum IDE/ATA data transfer rate of 66 MB/sec (100MB/sec) 3.3V Operating Voltage with 5V tolerant I/O General: PCI Specification Revision 2.2 compliant ATA/ATAPI-6, UDMA6 ATA/133 compliant Maximum data transfer rate: 133MB/sec Automatic performance tuning for each device attached Fully backwards compatible with Ultra ATA/100, Ultra ATA/66, Ultra ATA/33, EIDE/Fast ATA-2, IDE