DS692 6" x 9" 2-Way Coaxial Speakers view larger Mounting 1. Determine where the speakers will be mounted. Make sure the area is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for the speaker to fit. 2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. 3. If needed, use the grille as a template to mark the locations for the mounting screws. Drill the holes with a 3/32" bit. 4. Be sure to observe proper polarity when connecting the wires. The speaker"s positive terminal is indicated with a "+" symbol. 5. Fit the speaker to the hole cut-out. Mount the speaker using the supplied screws. If the speaker grill is to be used, insert 4 screws into the grill holes and then mount the speaker. Features 6" x 9" 2-Way Coaxial Speaker Black metalized PP Cone Black Foam Surround Specifications 120 Watts Peak (IPP) 60 Watts (RMS) Sensitivity: 89 dB Nominal Impendance: 4 Ohms Freq. Responde: 70 Hz-20kHz Specifications Guide DS42 DS52 DS652 DS692 DS573 DS653 DS693 Mounting Height .38" .44" .38" .38" .40" .40" .40 Top-Mounting Depth 2.25" 3.06" 2.00" 3.00" 2.10" 2.10" 2.68" Tweeter Protrusion .25" .31" .25" .19" .30" .30" .30" Bottom-Mounting Depth 2.00" 2.75" 2.30" 3.31" 2.40" 2.40" 2.98" Cut-out Diameter 3.63" 4.56" 5.63" 6.00" x 8.69" 5.00" x 7.13" 5.63" 5.88" x 8.69" Sensitivity (dB) 86 86 86 88 90 89 91 Frequency Response 85Hz-20kHz 85Hz-20kHz 85Hz-20kHz 70Hz-20kHz 70Hz-20kHz 75Hz-20kHz 60Hz-20kHz RMS Power Rating 50 50 50 60 60 60 75 Peak Power Rating 100 100 100 120 120 120 150