Key Features AC Input 115V - 230V Dimensions WxDxH 3.9" x 5" x 2.5" MTBF 100,000 hours on maximum load at +25° C degree Warranty 1 Year Output Power 200 W Form Factor Micro ATX Detail Specifications - Complied with SFX and SFX12V standard - High efficiency and reliability - Remote On/Off function - Internal 12V DC fan included - Noise Killer (Thermal fan speed control function) - Low noise and ripple - Complies with FCC part 15 subpart J Class B and CISPR 22 Class B - Output over voltage, short circuit, and over current protection - 100% Hi-pot, ATE, and burn-in tested - Re-settable power shut down - Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report) Input Range - 95~132/190~264V AC, Manual selection Frequency - 47~63Hz Input Current - 7A (RMS) @115V AC, 4A (RMS) @230V AC Inrush Current - 40A Max for 115V AC Cold start Temperature Range - Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +65° C Humidity - 90% on operating and 95% on storage Dielectric Withstand - Input to frame ground 1800V AC for 1 second Efficiency - 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output Rise Time - Less than 20ms on all output Hold-up Time - 16.6ms minimum at115V/60hz; 20ms minimum at 230/50Hz input voltage Power Good Signal - Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current - Not exceed 3.5mA MTBF - 100,000 hours on maximum load at +25° C degree Dimension (WxHxL) - 100x63.5x125mm/3.9¿x2.5¿x5¿ inches Weight - 3.50lbs Warranty - 1 year