This iron-on mending fabric is to repair a tear, worn area or hole. Also, for reinforcement and decorative applications. Check fiber content of item to be repaired to be sure it can withstand the heat setting required for correct application. Instructions are, wash garment before applying patch. Heat dry iron for 5 minutes on cotton setting. Cut patch slightly larger than area to be mended, round corners. If patch will cover a hole, place a-piece of paper underneath hole before applying patch. Working on a firm, protected surface, preheat worn area with iron. Position patch, shiny side down on garment. Press firmly for 40 to 45 seconds. Finish by pressing around edges. Allow patch to cool and check bond. Press again if necessary. Washable and dry cleanable. Available in light assorted color. Measures 8-inch length by 3-inch width.