Spezifikation: * Arduino Mega Shield * Plug in all motors with simple 4-way JST connectors. * Made for Ultimaker"s UltiStepper Driver. * Compatible with Pololu stepper driver boards. * Controls up to 5 stepper motors (3 for the X, Y and Z axis one for an extruder (the "E axis"), optionally you can add another axis by adding a Pololu stepper driver. * Configurable step sizes by placing jumpers * 3x 55 Amp MOSFETs outputs (with LED indicators. Actual current capability limited by PCB and connectors) * All pins are broken out for maximum extensibility * Runs from 15V to 19V. * Three thermocouple inputs, or thermistor inputs. The 100K thermistor is recommended. * Has a IDC header for adding an LCD panel (movie here) * Has a header for adding an SD card module. * A toggle-switch for powering up/down the board * Easier to wire up thermocouples * Includes a 12V regulator for an (always on) fan to cool the electronics. * A PWM output with power for LED arrays and other lighting * LCD backlight dimming can now be software controlled * A serial I/O header for bluetooth and ethernet add-ons. * Servo outputs for experimental setups. They need to be interrupt or software driven as the pins routed to the servo header I/O do not have PWM. * Compatible with UltiController Lieferumfang: 1X SainSmart Ultimaker 1.5.7 Controller Reprap RampsHinweis: Sie könnten die Daten für den Artikel durch folgenden Link herunterladen: https://s3.amazonaws.com/www.dasgute.com/20/20-029-103+ultimaker.rar