A solvent based enamel paint with a matt finish Usage A solvent based fast dry paint developed for use on plastic model kits but which can also be used on other substrates Matt Satin Gloss Metallic Metalcote and Clear finishes are available Substrate A wide range of surfaces including most plastics wood glass ceramics metal cardboard sealed plaster sealed hardboard and more always check on a small test area to check suitability Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners Two thin coats are preferable to one thick coat The usual thinning ratio is 2 parts paint to one part thinner Note that Metalcote colours are designed to be polished when fully dry Drying Time Matt Satin 20 40 minutes touch dry and upto 24 hours for hard dry Drying times will vary according to ambient temperature and humidity Recoat 6 hours minimum preferably over night Coverage A 14ml tinlet covers approx 0 3m2 depending on thickness of application How to Clean Brushes Use Enamel Thinners Airbrush flush through using Humbrol Enamel Thinners Product is perminant once dry